July 2008

Monthly Archive

Setting Up My Ausu P750 to Send MMS through Gee!

Posted by Jack Lan on 15 Jul 2008 | Tagged as: Jack's Life

If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!

Was trying to send an image MMS and failed in all my attempts! Decided to search the web for solution and this site come to my rescuse.

http://www.trendsmobile.com/main/showsection.asp?SectionID=114&ParentID=97

Decided to place the instruction in my blog as nowadays more and more people are using Pocket PC (PPC) and of course there are increasing Starhub users, these information might be useful to some. But if you are Singtel or M1 user, i afraid you have to do your own search while the instruction should be similar but the setting are confirm different.

Here is the details is you are setting up your PPC for surfing Web using GPRS Starhub Gee!:

GPRS Configuration
To set up GPRS on your GPRS-enabled PocketPC phone, just perform the following steps:
1. From the Start Menu, Go to Settings–> Connections Tab–> Connections
2. Select ” Add a new modem connection” under My ISP
3. Enter a preferred name for your connection, e.g. Gee! GPRS
4. Select Cellular Line (GPRS) option under “select a modem” and tab “Next”
5. Enter the Access Point Name as “shwap” and tab “Next”
6. Leave Username, password and domain blank and tab “Advance”
7. Ensure option “Use server-assigned IP address” is selected
8. Ensure options “Use software compression” and “Use IP header compression” are unselected
9. Tab “Servers” tab and ensure that “User server assigned addressees” is checked
10. To enjoy the internet over GPRS, simple tap the “G” icon at the top bar of your screen. A bubble will appear, giving you the option to connect to your carrier’s GPRS network.
11. To disconnect, simply hold the “end call” button.
Here are the details if you are setting up your PPC for sending and receiving MMS using GPRS Starhub:
MMS Configuration
To set up GPRS on your GPRS-enabled PocketPC phone, just perform the following steps:
Connections Portion
1. From the Start Menu, Go to Settings–> Connections Tab–> Connections
2. Select ” Add a new modem connection” under My Work Network
3. Enter a preferred name for your connection, e.g. Gee! MMS
4. Select Cellular Line (GPRS) option under “select a modem” and tab “Next”
5. Enter the Access Point Name as “shmms” and tab “Next”
6. Leave Username, Password and domain blank and tab “Advance”
7. Ensure option “Use server-assigned IP address” is selected
8. Ensure options “Use software compression” and “Use IP header compression” are unselected
9. Tab “Servers” tab and ensure that “User server assigned addressees” is checked
10. Tab “OK” and select the “Proxy Settings” tab
11. Ensure “This network connects to the Internet” and “The network uses a proxy server to connect to the Internet” options are checked
12. Tab the “Advance…” button
13. Under WAP, enter “10.12.1.2” and ensure the WAP port is defaulted at “9201″
Messaging Portion
14. Goto “Start–> Messaging–> Menu–> MMS Settings–> MMS Default and select “Edit”
15. Fill in the settings as follows:
Profile Name-                Gee! MMS
 IP Address-                    10.12.1.80
 Port-                                 9201
MMSC-                             http://mms.starhubgee.com.sg:8002/
 Data Connection-          My Work Network
Gateway-                         WAP 1.0 Gateway
16. Tap “Done”
17. Set as Default Gee! MMS
18. You are ready to send a MMS
Note
a. You may need to apply for the use of GPRS with your carrier, depending on the carrier and mobile plan you are on.
b. Charges apply for the use of GPRS. Please consult your carrier for the rates/charges applied.
c. The above settings are tailored for glofiish Windows Mobile series..

No Comments »